Kurzweil SP4-7 Instrucciones de operaciones descargar pdf (Pagina 109)

Troubleshooting

PedalProblems

12-5

If there are problems with the internal sound module receiving MIDI from an external

device like a computer sequencer, check if one of the following might be the issue:

The MIDI transmit channel of

transmitting device does not

match that of the receiving

Program or Zone on the SP4.

Change the channel on either the

SP4 or on the computer such that the

channels match.

The MIDI cable is not securely

plugged in at both ends.

Securely plug in the MIDI cable at

both ends.

The MIDI connections are

wrong.

To receive MIDI, plug the MIDI

cable into the SP4’s MIDI In port

and into the module’s MIDI Out

port.

Pedal Problems

Before you consult this section, be sure to read Connecting Pedals on page 2-5.

Switch Pedal Problems

If you are having problems with connecting or using a switch pedal, check if one of the

following might be the issue:

• Sustain or Sostenato is stuck “on”. Be sure the pedal is plugged in before switching

on the power. Turn power off then on if necessary.

• The pedal is acting backward (“on” when up instead of down). Power cycle the unit

making sure to NOT press on the pedal during startup.

• A dual pedal is not working correctly. A dual switch pedal must be wired as shown

below. Any other wiring pattern will not work correctly.

Sleeve Ring Tip

Left Pedal Right Pedal

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 117 118

Sin comentarios

Kurzweil SP4-7 Instrucciones de operaciones Pagina 109